Books in the A CCPS Concept Book series

This book documents CCPS's Aerosol Research Program to develop a model to predict liquid rainout from release of a pressurized, liquefied gas--and, hence the residual amount of material in a vapor cloud, which may be greater than the amount calculated from an enthalpy chart. RELEASE predicts the rate of fluid discharge, the depressurization, flashing and formation of liquid drops, the entrainment of drops into the vapor cloud, the subsequent spreading of the jet, and rate of liquid rainout to a pool on the ground. Designed in a modular fashion to permit adjustment and corrections as new data become available, its multi-layered approach contains sub-models that include the complexities of many variables, including the effect of liquid superheat, rate of bubble growth, criterion for bubble formation, and heat transfer from the liquid to the growing vapor bubble. To validate RELEASE, CCPS conducted small- and large-scale experiments using superheated water, heated liquefied chlorine, methylamine, and cyclohexane that produced valuable data in an area where data are scarce. This book gives complete access, in text and on CD-ROM, to the model and the test data, giving users an informed ability to apply the model to their own work.

Join other major companies and start your LOPA efforts now by purchasing this book.

Written and edited by engineering contractors and industry project/maintenance managers as an easy-to-use guide for other industry professionals, this book identifies important process safety issues in the contractor-client relationship, which are not addressed by other groups and publications. While the issues may arise at any point in the life cycle of a plant, they should be resolved early in the relationship to permit a clearer focus on process safety issues. Topics covered are a general discussion of contractor safety programs; EPC (engineering, procurement, construction) contractual bases and work division as they address regulatory PSM issues; subcontractor relationships; and managing contractor-client risks

A brief introduction to a complex topic, giving a description of the processes involved in an accidental or emergency release and the resulting downwind transport and dilution of gases, vapors, and aerosols.

Quantitative Risk Analysis is a powerful tool used to help manage risk and improve safety. When used appropriately, it provides a rational basis for evaluating process safety and comparing alternative safety improvements. This guide, an update of an earlier American Chemistry Council (ACC) publication utilizing the "hands-on" experience of CPI risk assessment practitioners and safety professionals involved with the CCPS and ACC, explains how managers and users can make better-informed decisions about QRA, and how plant engineers and process designers can better understand, interpret and use the results of a QRA in their plant.

At last, smaller chemical processing operations have truly easy access to process safety and risk management programs tailored to meet their needs. Written as a "how to" book with checklists, it offers sufficient information for managers of facilities with small chemical operations to implement a process safety program and meet existing regulations.

Designed for chemical engineers and other technical personnel involved in the design, operation, and maintenance of facilities and equipment where deflagration and detonation flame arresters (DDFAs) may be required, this book fosters effective application and operation of DDFAs through treatment of their principles of operation, selection, installation, and maintenance methods. This reference covers a broad range of issues concerning DDAs, including: An overview of deflagration and detonation prevention and protection practicesAn overview of combustion and flame propagation and how DDAs halt propagationDeflagration and detonation flame arrester technologyInstallation in process systemsRegulations, codes, and standardsIllustrative examples, calculations, and guidelines for DDA selectionAppendices, including a glossary, a flame arrester specification sheet for vendor quotation, and a listing of flame arrester manufacturers.

Written by Laurence Britton, who has over 20 years' experience in the fields of static ignition and process fire and explosion hazards research, this resource addresses an area not extensively covered in process safety standards or literature: understanding and reducing potential hazards associated with static electricity. The book covers the nature of static electricity, characteristics and effective energies of different static resources, techniques for evaluating static electricity hazards, general bonding, grounding, and other techniques used to control static or prevent ignition, gases and liquids, powders and hybrid mixtures.

This CCPS Concept book shows designers and operators of chemical facilities how to realistically estimate the flammable mass in a cloud of accidentally released material that is capable of igniting. It provides information on industry experience with flammable vapor clouds, basic concepts of fires and explosions, and an overview of related computer programs.